| Customization: | Available |
|---|---|
| Type: | Flotation Separator |
| Voltage: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Category | Specification Model |
Effective cubage (m³) |
Processing capacity (m³/min) |
Main shaft loam board | Dimensions (L×W×H) (mm) |
Single trough Weight (t) |
|||
| Power (kw) |
Rotate speed (r/min) |
Rotate speed (r/min) |
Power (kw) |
||||||
| XJK type flotation machine |
XJK-0.35 | 0.35 | 0.18-0.4 | 1.5 | 483 | 25 | 1.1 | 700×700×700 | 0.5 |
| XJK-0.62 | 0.62 | 0.3-0.9 | 3.0 | 400 | 25 | 1.1 | 900×820×850 | 1.0 | |
| XJK-1.1 | 1.1 | 0.6-1.6 | 5.5 | 330 | 25 | 1.1 | 1100×1100×1000 | 1.4 | |
| XJK-2.8 | 2.8 | 1.5-3.5 | 11 | 280 | 25 | 1.1 | 1750×1600×1100 | 2.5 | |
| XJK-5.8 | 5.8 | 5-7 | 22 | 240 | 25 | 1.5 | 2200×2200×1200 | 3.6 | |
| SF type flotation machine |
SF-0.37 | 0.37 | 0.2-0.4 | 1.5 | 386 | 25 | 1.1 | 700×700×750 | 0.5 |
| SF-0.7 | 0.7 | 0.3-0.9 | 3 | 400 | 25 | 1.1 | 900×820×950 | 1.0 | |
| SF-1.2 | 1.2 | 0.6-1.6 | 5.5 | 330 | 25 | 1.1 | 1100×1100×1100 | 1.9 | |
| SF-2.8 | 2.8 | 1.5-3.5 | 11 | 268 | 25 | 1.1 | 1750×1600×1150 | 2.6 | |
| SF-4 | 4 | 2-4 | 15 | 220 | 25 | 1.5 | 1850×2050×1200 | 2.9 | |
| SF-8 | 8 | 4-8 | 30 | 191 | 25 | 1.5 | 2200×2900×1400 | 4.2 | |
| SF-10 | 10 | 5-10 | 30 | 191 | 25 | 1.5 | 2200×2900×1700 | 4.5 | |
| SF-20 | 20 | 5-20 | 30×2 | 191 | 25 | 1.5 | 2850×3800×2000 | 9.9 | |
| JJF type flotation machine |
JJF-2 | 2 | 1-3 | 7.5 | 443 | 25 | 1.5 | 1400×1400×1100 | 1.7 |
| JJF-4 | 4 | 2-4 | 11 | 305 | 25 | 1.5 | 1600×2150×1250 | 2.4 | |
| JJF-8 | 8 | 4-8 | 22 | 233 | 25 | 1.5 | 2200×2900×1400 | 4.5 | |
| JJF-10 | 10 | 5-10 | 22 | 233 | 25 | 1.5 | 2200×2900×1700 | 4.9 | |
| JJF-16 | 16 | 5-16 | 30 | 180 | 25 | 1.5 | 2850×3800×1700 | 8.0 | |
| JJF-20 | 20 | 5-20 | 37 | 180 | 25 | 1.5 | 2850×3800×2000 | 10.5 | |
Flotation Cell Manufacturer
1. The slurry pile is trough: it includes the port feeding in the pulp and the switch device, which is made up of a trough welded and a switch both welded with the steel plate and the steel rod.
2. The mixing device: it is used for mixing pulp and preventing ores in the tub precipitation. It is mainly made up of the pulley, impeller made by the wear-resisting rubber and the vertical axis.
3. The inflatable device: it consists of catheter intake pipes. When the impellers are rotating, the negative pressure produced in the cavity of the impellers absorbs the air through the hollow pump line, which will be dispersed into the pre pulp and form the bubbles. The ore pulp with large amount of bubbles is thrown to the stators due to the rotating force of the impellers to fine the bubbles in the ore pulp and eliminate the rotating flow of the ore pulp in the flotation cell. Then large numbers of bubbles go up vertically to offer necessary conditions for the process of flotation.
4. The eliminating mineralization bubble device: it scrapes the bubbles above the surface of the cell, with the engine driving the reduction machine generally.
Our service :
Provide you with project and process design, formulate the plan for purchasing, design and manufacture the products according to your special requirements and train your operators.
Selling service
Help you to check the equipments before acceptance, draw up the construction scheme and the detailed process.
After-sale service
Contact us : Sara
Mobile phone ): 0086 137 8347 1727
Dispatch our technicians to your construction site to guide the installation, test the site and train your operators.
){kind=link}