Mining Machine For Rock Gold ,Alluvial Gold Mining Machine :
we mainly process equipments for such gold: 1 rock gold 2 alluvia gold
General flow process for processing rock gold:(design may vary when gold nature different)
Four Steps Of gold ore plant(Gold ore,Iron ore)
Step1:Crushing-- Put the ingredients broken
1)process introduction: Due to the volume of ore produced is too large , so it is necessary to the mined ore crushing. In this process , send the ore into the crushing device to crushed . In general, The System requirements of the ore particle size for general 12mm------18mm.
2).Main Equipment: Jaw crusher,impact crusher,hammer crusher,cone crusher etc
Step2:Grinding--The processing of raw materials carefully
1) Process introduction: In this process, we must first make clear the requirements for each ore solution particle standards, Based with the aid of various equipment, put all sorts of ore grinding to separation units required unit solution size.
2).Main Equipment:Feeder,Ball Mill,Classifier, Overflow ball mill,etc.
Step3: Sorting --Select fine ore powder
1).Process introduction: In the production process,not all the ore powder are in line with the standard . we need to filter the ore powder . In this process We use professional equipment to elect qualified concentrate powder from ore , eliminated does not meet the criteria for ore.
2).Main Equipment:Mixing machine ,Flotate separator,shaking table,spiral chute,etc.
step4:Dehydration --Take off water in the ore
1).Process introduction: Due to various constraints, after the front of several processes , there are always some residual moisture in the ore powder, then we need to pick out concentrate dehydration, to meet the requirements of transportation and smelting.
2.)Main Equipment:Vacuum filter,Box pressure filter,Folding belt filter,Ceramic filter,Vacuum pump, Driving thickener,etc.
Mining Machine Wet Pan Mill Technical Parameters:
| Model |
Specification |
Input size(mm) |
Process ability
(t/h) |
Speed
(r/min) |
Motor
(kw) |
Weight
(t) |
| 1600 |
1600×400×±20 |
Less than 30mm |
4 |
20-22 |
6-30 |
17 |
| 1500A |
1500×400×±20 |
|
3 |
20-22 |
6-22 |
15 |
| 1500B |
1500×350×±20 |
|
2.5-3 |
20-22 |
6-22 |
14 |
| 1500C |
1500×300×±20 |
|
2-2.5 |
20-22 |
6-22 |
12.5 |
| 1400 |
1400×250×±20 |
|
1.5-2 |
16-18 |
6-18.5 |
9.5 |
| 1300 |
1300×250×±20 |
|
1.5 |
21-23 |
6-15 |
7.8 |
| 1200A |
1200×220×±20 |
|
0.9-1.2 |
16-18 |
4-7.5 |
6.0 |
| 1200B |
1200×200×±20 |
|
0.8-0.1 |
21-23 |
4-7.5 |
5.8 |
| 1100 |
1100×200×±10 |
|
0.6-0.8 |
16-18 |
4-5.5 |
5.5 |
| 1000 |
1000×200×±10 |
|
0.5 |
21-23 |
4-5.5 |
4.5 |
| 900 |
900×150×±10 |
|
0.3 |
17-19 |
3 |
3.2 |
Contact:
Ms Sara Pang
Mobile phone :: 0086137 8347 1727
Audited Supplier 
){kind=link}