Hot Sale Low Price Chute Feeder for Mining Machine

• Type: Chute Feeder
• Movement Mode: Linear
• Usage: Mine, Gravel Field, Metallurgy, Building Materials, Chemical Industry, Ore-dressing, Colliery
• Appearance: Open-Type
• Max Feeding (mm): 750
• Capacity(t/h): 400-600
• Model NO.: Various
• Motor Power(kw): 20~25
• Installation Slope: 5
• Chute size(mm): 6000×1300
• Overall Dimension: 6082×2580×2083
• Brand: Hengxing
• Price: Factory Price
• Place of Origin: China
• Drawing: Offer
• Installation: Engineer Oversea Service
• Spare Parts: One Year for Free
• Maintenance: We Dispatch Engineer
• Warranty: 1 Year

Product Description

Hot Sale Low Price Chute Feeder for Mining Machine

 

Manufacturing	Zhengzhou Hengxing Heavy Equipment Co., Ltd.
Web	zzhxpsj.en.made-in-china.com
Mobile	[phone] ( 7x24h Hot Line)
Address	No. 8 Hongye Road, West Hehuan Street, High-Teeh Development Zone, Zhengzhou, China

Introduction to small mechanical Chute Feeder
The chute feeder can be installed on the ground or on the discharge port of ore bin. The chute bottom plates do the reciprocating movement, the frequency of the movement is 20-60 times/minute and the stroke is 20-200mm, stroke can be adjusted by the eccentric wheel, the eccentric throw is half of the stroke. According to experience of some mine sites, the eccentric throw should no less than 30mm for cohesive ore.

The chute width is 2-2.5 times of maximum feeding granularity. The biggest chute feeder can supply ore with granularity less than 500mm, the most common specification is 980x1240 chute feeder, with feeding granularity between 350mm, which is the suitable for the 400x600 jaw crusher





Working principle of Vibrating Feeder:
There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the feeder.

Technical parameter

Dimension (L*W)	Power (KW)	Reciprocating frequency (times/min)	Capacity (t/h)	Max feeding size (mm)
400x400	1.1	18.8	2.5-3	100
600x500	4	38.9	10.5-25.5	200
1000x700	5.5	30	23-50	150
1240x980	7.5	23.7	36-90	350
1500x1000	7.5	46	300-700	350