Wet type gold pan mill
I. Introduction to gold pan mill
The gold grinding machine used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing, rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utili
II. Technical Parameter
| Model |
Speed r/min |
Power (kw) |
Process ability( t/h) |
Weight(T) |
| 850 |
13-18 |
4.5 |
0.4 |
3 |
| 900 |
13-18 |
5.5 |
0.6 |
3.6 |
| 1000 |
13-18 |
5.5 |
0.8 |
4.2 |
| 1100 |
13-18 |
7.5 |
1 |
4.6 |
| 1200 |
16-18 |
7.5 |
2 |
5.8 |
| 1300 |
16-18 |
11 |
3 |
8 |
| 1350 |
16-18 |
13 |
4 |
8.5 |
| 1400 |
16-18 |
15 |
5 |
9.5 |
| 1500 |
20-22 |
22 |
8 |
10.5 |
| 1600 |
20-22 |
30 |
10 |
16 |
III. Working Principle
1).The motor will transmit the motive power to reduction gears, under the drive of
reduction gears that passing through large vertical spindle, then the power cabient transfers <o:p>
to above whippletree
2).The whipple tree pulls the two roller wheels clockwise rotation,runner wheels are not only
revoluting around the large vertical spindle but also could retating by themselves.
3).After adding into ore,the materials are under the extrusion of grinding roller weight to
revoluting and rotating with roller wheels, when twisting that coming into being huge friction
force with grinding base,after suffering repeated extrusion,rub,grinding that be crushed
thoroughly.
4).Under the affection of grinding roller operating, the crushed materials and the water mixed
intensively to float on it uniformly,then passing through the overflow discharge gate that
setting up on the mill basin to discharge,after that enter into next operation procedure to
process.
5).Coarse mineral was sank on the bottom of grinding base, keep grinding and crushing,till the fineness could reach to standard floating on it.
Audited Supplier 
){kind=link}