Gypsuum rotary dryer is designed in single drum, direct heating way. It is used to dry free water of synthetic gypsum, phosphogypsum which is used in cement industry.
Gypsum Dryer structure:
1) Cylinder;
2) feeing inlet and outlet
3) gear ring
4) support roller
5) roller ring
6) drive unit
7) dust filter
Gypsum dryer heating source could be gas, coal, the temperature is adjustable. We have different models for choice.
Gypsum rotary dryer working principle:
Working Principle of Gypsum Rotary Dryer: Material shall be dried to enter the dryer. When the dryer is rotating, a series of internal fins will lift the material by lining the inner wall of the dryer. When the material reaches certain height to roll the fins back, it will be fell back to the bottom of the dryer, then passing through the hot gas stream as it falls. This gas stream can either move toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be composed of a mixture of air and combustion gases from a burner, and in which case the dryer is known as a direct heated dryer. Alternatively, the gas stream may be made up of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases are not permitted to enter the dryer, the dryer shall be called an indirect-heated type. Indirect heated dryers are commonly used when product contamination becomes a concern.
Welcome to cotact us if you have any inquiry for gypsum rotary dryer.
Gypsum rotary dryer technical parameters:
| Specifications(m) |
Capacity(t/h) |
Main motor |
Main gear box |
Weight(t) |
| Power(kw) |
Model |
Model |
Speed reduction ratio |
| ø 1.2*10 |
2.5 |
7.5 |
Y160M-R3 |
ZL50-16-I |
----- |
13.5 |
| ø 1.5*12 |
3.3-4.9 |
10 |
Y160L-6-B3 |
JZQ500-III-2F |
----- |
18.9 |
| ø 1.5*15 |
4-6 |
18.5 |
Y200L1-6 |
JZQ500-III-2F |
----- |
21 |
| ø 1.8*12 |
4-6 |
18.5 |
Y160L-6 |
ZQ50-16II-2 |
16.46 |
22.83 |
| ø 2.2*12 |
7-12 |
18.5 |
Y200L7-6 |
JZQ650-III |
31.5 |
37.6 |
| ø 2.2*14 |
7-12 |
22 |
Y200L7-6 |
JZQ650-III |
31.5 |
40 |
| ø 2.2*16 |
12 |
30 |
Y225M-6 |
JZQ750-III |
31.5 |
45 |
| ø 2.4*14 |
12 |
30 |
Y250M-6 |
JZQ750-III |
31.5 |
51 |
| ø 2.4*18 |
10-13 |
37 |
Y250M-6 |
ZL85-13-I |
27.16 |
54 |
| ø 2.4*20 |
10-14 |
37 |
Y250N-6 |
ZL85-13-I |
27.16 |
54.14 |
| ø 3*20 |
25 |
55 |
Y250M-4 |
ZL100-16-I |
41.52 |
78 |
| ø 3*25 |
32-36 |
75 |
YR280M-4 |
ZL100-16-I |
41.52 |
104.9 |
how to improve rotary dryer's efficiency
1. Improving temperature of drying medium of rotary dryer.
2. Improving flow rate of drying medium.
3. Improving internal structure of cylinder body of rotary dryer, adopting combined raise material.
4. Reducing material feeding granularity
5. Using concurrent processing set-up where possible
6. Adopting step-less speed regulator
Contact:
Sara
Mobile phone :0086137 8347 1727
Audited Supplier 
){kind=link}