| Customization: | Available |
|---|---|
| Model: | Φ2.2×20 |
| Object: | Material with High Moisture |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Slag rotary dryer application :
rotary dryer is mainly used for drying materials with some moisture and granularity in ore beneficiation, building material, metallurgy and chemical department. Drum dryer has high adaptability to the materials so that it can be used for drying all kinds of materials, and in addition, the operation of this equipment is simple and reliable, for this reason, it gets wide application.
The Inner Structure and Function of The Slag Rotary Dryer:
This slag rotary dryer machine is mainly composed of rotary part, lifting board, transmission part, supporting part and seal ring. The drum dryer produced by our company uses reasonable running parameters, and the coal and electricity consumption is reduced by over 10-15% and the output per machine is improved by over 10-15%, so that it has been widely used in the cement plants and ore beneficiation plants.
Slag rotary dryer working principle :
The heat source of the drum dryer comes from the combustion device and this dryer uses co-current heating method, so that when the materials to be dried go into the cylinder from the feeding box or feeding chute, they are pushed back by the spiral lifting board. Since the drum dryer is obliquely installed, the materials flow to the lower end of the machine under the gravity and the rotation of the machine, and on the other hand, the materials are repeatedly lifted by the lifting board to the higher end and then spread down constantly, so that the materials will form a even curtain inside the cylinder and conduct heat exchange with the hot air inside the cylinder. Since the materials constantly spread and the water contained in them will be dried, thus achieving the aim of drying.
Slag rotary dryer technical parameters:
|
We supply rotary dryer which made of carbon steel or stainless steel |
||||||
|
Rotary dryer size |
Obliquity(%) |
Rotation speed (r/min) |
Max temperature (degree) |
Power (kw) |
Capacity(t/h) |
Weight (t) |
|
800x10000 |
3-5 |
3-8 |
<=700 |
4 |
0.8-2.5 |
4.5 |
|
1000x10000 |
3-5 |
3-8 |
<=700 |
5.5 |
1.0-3.5 |
5.6 |
|
1200x10000 |
3-5 |
3-8 |
<=700 |
7.5 |
1.8-5 |
14.5 |
|
1200x12000 |
3-5 |
3-8 |
<=700 |
11 |
2-6 |
14.8 |
|
1500x12000 |
3-5 |
2-6 |
<=800 |
15 |
3.5-9 |
17.8 |
|
1800x12000 |
3-5 |
2-6 |
<=800 |
18 |
5-12 |
25 |
|
2200x12000 |
3-5 |
1.5-6 |
<=800 |
18.5 |
6-15 |
33 |
|
2200x18000 |
3-5 |
1.5-6 |
<=800 |
22 |
10-18 |
53.8 |
|
2200x20000 |
3-5 |
1.5-6 |
<=800 |
30 |
12-20 |
56 |
|
2400x20000 |
3-5 |
1.5-5 |
<=800 |
37 |
18-30 |
60 |
|
3000x20000 |
3-5 |
1.5-5 |
<=800 |
55 |
25-35 |
78 |
|
3000x25000 |
3-5 |
1.5-5 |
<=800 |
75 |
40TPH |
104.9 |
|
3400X25000 |
3-5 |
1.5-5 |
<=800 |
110 |
80tons per hour |
140 |
Slag rotary dryer features:
The rotary dryer produced by our company uses new lifting board with many functions of guiding, current sharing and material lifting, and the materials can be comprehensively distributed on the radial sections of the drum dryer and the material curtain is in the thin, average and full state and the materials can fully contact the hot air, thus achieving the aim of making full use of the heat.
Slag rotary dryer customer site :
FAQ:
1:Q: How about the quality of your products?
A: Our machines are manufactured strictly according to national and international standards, and we take a test on each equipment before delivery. You can also use Trade Assurance by Alibaba for product quality protection, on-time shipment protection and payment protection.
2 Q: How about price :
A: we are manufacturer and we have the strength to give you the lowest price compared with other dealers. However, we have the policy that "According to the quantity order, we will offer the lowest price as possible with our utterly honest attitude towards business "
3. Q: How about the after-sale service
A: 1.The construction drawings of foundation will be supplied for our clients.
2. Supplying technique, building design, instruction, installation and debugging.
3. Offering lifelong services and provide spare parts with favorable price for a long term.
){kind=link}