| Customization: | Available |
|---|---|
| Type: | Composite Crusher |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Energy Saved Crushing Equipment, Stone Vertical Combination Crusher
Introduction of Energy Saved Crushing Equipment, Stone Vertical Combination Crusher
Vertical compound crusher can be classified into glass crusher, gypsum crusher machine, small stone crusher, vertical crusher and Compound crusher. Compound crusher is widely used to crush shale, glass, ceramics, bluestone, metal ores, cement raw meal, clinker in building sand, iron ore, sandstone, gypsum, coal gangue, coal, etc. Especially in sand making and metal ore stone, compound crusher is most widely used crushing machine.
This vertical compound crusher enjoys the merits of big reduction ratio, low energy consumption, smooth operation, simple structure, easy maintenance, and other characteristics, which is truly a new type of crushing equipment that are of multi-purpose, high efficiency and low cost. compound crusher (composite broken) crushing ratio greater degree, the maximum reduction ratio can reach the particle size can be adjusted, without plate hammer, liner wear impact; without sieve set, crushing high moisture content, clay content when large material clogging; adopt a flexible adjustment mechanism into the non-broken material can be automatically discharged, will not cause damage to the equipment; bearing horizontal arrangement, long life, high temperature materials can be broken (such as cement clinker); this machine rotor body unique structure, crushing the material, the rotor body almost no wear and tear; after the cavity is provided with a screw or hydraulic opening mechanism, not from the master device, you can easily replace wearing parts.
Work Principle of Energy Saved Crushing Equipment, Stone Vertical Combination Crusher
When vertical compound crusher works, the rotor which is fixed on the main bearing will rotate in high speed driven by the motor. Bulk materials are fed into the material-throwing plate from the feeding hopper. After the impact of the material-throwing plate in high speed, under the action of centrifugal force, the materials are cast into the impact plate to be crushed. Under the gravity, the materials on the slop of the impact plate are crushed again by the secondary hammer. After being crushed by multi-layer hammers, direct discharge from the bottom to form a closed loop several times, the materials are discharged at the end, controlled by the screening equipment to achieve the request
Application of Energy Saved Crushing Equipment, Stone Vertical Combination Crusher
Application field: Widely used in all kinds of ores, cement, refractory materials, bauxite clinker, carborundum, glass raw materials such as hard, hard materials, finely in the field.
The Vertical compound crusher is widely used in various ores, cement, refractories, bauxite clinker, carborundum, glass raw materials high-hard, special hard material, the crushing fields. In the mechanism building sand, stone and various metallurgical slag crushing is widely used, and compared to other types of crushers yield high efficiency.
Features of Energy Saved Crushing Equipment, Stone Vertical Combination Crusher
1. Compound cone crusher uses the best combination of crushing frequencies and eccentricity, so it can crush materials into finer particles
2. The crushing capacity of the compound cone crusher is higher compared to similar models
3. The machine can enhance the role of the lamination of material smashing, and effectively improve the three-dimensional shape of crushed material
4. The pneumatic and hydraulic insurance, hydraulic lock, hydraulic adjustment and hydraulic cavities cleaning make the operation easier to automate
5. Under normal conditions of use, the device adopts optimized design, allows trouble-free run rate more than 95%
6. The compound cone crusher is divided into standard type and short-head type
7. Short-head type compound cone crusher is conducive to the production of fine-grade materials, while standard type compound cone crusher is commonly used for medium crushing and fine crushing
Advantages of Energy Saved Crushing Equipment, Stone Vertical Combination Crusher
1. Large crushing ratio
2. Discharge particle size is adjustable.
3. No influence of hammer and impact plate bearing; no grating. When crush the materials with high water content and mud content, it is not easily being blocked.
4. It adopts elastic adjusting mechanism so that the non-crushing materials can be discharged automatically without damage the machine.
5. The bearing is in horizontal layout and has long life span.
6. Compound crusher can crush high-temperature materials (like cement clinker).
7. The rotor of compound crusher has special structure and when crushing the materials, and there is barely abrasion for the rotor.
Parameters of Energy Saved Crushing Equipment, Stone Vertical Combination Crusher
| Model | Rotater Diameter (mm) | Cylinder Height (mm) | Rotating Speed (r/min) | Input Size (mm) | Output Size (mm) | Capacity (t/h) | Motor | Overall Dimension(L×W×H)(mm) | Weight (t) | |
| Power(kw) | Rotating Speed | |||||||||
| 800 | 650 | 800 | 1350 | 50 | 0-5 | 5-15 | 30 | 1440 | 2200×860×1980 | 2.3 |
| 1000 | 800 | 850 | 970 | 70 | 0-5 | 10-30 | 55 | 1440 | 2700×1160×2000 | 4.5 |
| 1250 | 1000 | 850 | 740 | 100 | 0-5 | 20-60 | 75 | 750 | 2800×1400×2730 | 9.73 |
| 1500 | 1250 | 1000 | 650 | 100 | 0-5 | 30-80 | 110 | 750 | 3100×1900×2300 | 18.1 |
| 1750 | 1560 | 1410 | 600 | 100 | 0-5 | 40-100 | 132 | 750 | 3350×2100×2800 | 26.61 |
Our mission is providing our clients timely, rapidly, and efficiently services.
√ Rapid Reply
To the issue you propose, or the feedback, we are sure to make reply soon.
√ Providing Solution Design:
According to the results of communication with you, we will provide a design solution for you speedly.
√ Inspection Our Factory and Machines:
If you have interests, welcome to visit our factory and inspect the machine.
√ Order execution:
Provide equipment layout draw, foundation draw and detailed equipment manauls. Timely report you the manufacturing schedule and related photos.
√ Delivery fast:
We can arrange fast, safe shippment on time.
√ After-sales service:
If you need, we will dispatch engineer to the site to guide installation, debugging and training operators. Installation and operation workers are offered if you need
){kind=link}