Small Diesel Engine Vertical Compound Crusher Stone Crusher
Introduction of vertical compound crusher
Vertical Compound Crusher is a new type machine for fine and coarse crushing materials combining with the advanced technique of the same type crusher at home and abroad after optimizing the main parameters.
It is mainly handling raw materials and clinkers in medium cement plant, and is a perfect fine crushing equipment for technical innovation and reconstruction of a cement production line in cement plant
It is also suitable for crushing medium hardness ores, such as iron ore, sandstone, gypsum, blast furnace slag, coal gangue and lump coal.
It has features of big reduction ratio, low power consumption, stable performance, simple structure and easy maintenance.
Features of vertical compound crusher:
1. The production capacity is big.
2. The crushing ration is high and the power consumption is low.
3. The seal ability is good and machine running is stable.
4. The maintenance is simple
Working principle of vertical compound crusher
The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force.
Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
Parameters of vertical compound crusher
| Type |
Input size(mm) |
Output size(mm) |
Capacity(t/h) |
Rotation Speed(RPM) |
Motor Power(Kw) |
Dimension(mm) |
| PFL-800 |
<100 |
<3-5 60%-90% |
10-20 |
934 |
22 |
2100X1200X1700 |
| PFL-1000 |
<120 |
<3-5 60%-90% |
20-40 |
769 |
45 |
2600X1400X1900 |
| PFL-1250 |
<150 |
<3-5 60%-90% |
40-70 |
530 |
75 |
2800X1600X2100 |
| PFL-1500 |
<180 |
<3-5 60%-90% |
70-100 |
495 |
132 |
3710X2360X2390 |
| PFL-1750 |
<200 |
<3-5 60%-90% |
130-190 |
424 |
160 |
3710X2360X2390 |
| PFL-2000 |
<200 |
<3-5 60%-90% |
100-160 |
370 |
185 |
4100X2660X2620 |
Audited Supplier 
){kind=link}