Wet And Dry Drum Magnetic Separator Model CTB1050, Magnetic Mineral Separator Machine, High Efficiency Wet Iron Powder Magnetic Separator
1.Introduction of China Gold Mining Equipment Magnetic Separator For Iron, Gold
Magnetic separator can be divided into wet magnetic separator and dry magnetic separator. Wet magnetic separator is the commonly used separator in ore dressing plants, which is applicable to separate strong magnetic minerals. Magnetic separator can separate magnetite, limonite, hematite, manganese siderite ore, ilmenite, wolframite, manganese ore, metallurgical manganese ore, manganese oxide, iron ore, kaolin, rare earth mining and so on. Magnetic separation process is realized by the magnetic and mechanical force on the particles in the magnetic field. Different magnetic mineral grains will move along a different trajectory, thus sorting into two or more separate ore dressing products.
2. Application of High Efficiency Wet Iron Powder Magnetic Separator
Magnetic separator is suitable for materials with magnetic difference, which is widely used for resource recovery, timber industry, mining industry, ceramics industry, chemical industry, food and other workshops. Magnetic separator is suitable for wet separating of materials with below 3mm particle size, such as magnetite, pyrrhotite, roasted ore, ilmenite and other materials. It is also used for iron removing operation of coal, non-metallic minerals, building materials and other materials, which is one of the most extensive and high versatility devices.
3.Features of High Efficiency Wet Iron Powder Magnetic Separator
1). High magnetic intensity.
2). Low energy consumption.
3). Good beneficiating efficiency.
4). Simple structure and easy maintenance.
4. Advantages of High Efficiency Wet Iron Powder Magnetic Separator
1. Good separation effect: This machine adopts dynamic magnetic system. The raw ores slide, move and roll at the surface of the drum, and there is no ores sticking to the drum, which helps separate different ores. The grade can be improved 1-4 times in the first separation process, and the grade can reach 60% in fine separation process.
2. Large capacity: By using wrapped type open magnetic system, the materials do not stick together and the blocking phenomenon can be avoided, which leads to large capacity. The feeding capacity of an individual magnetic separator is at least 50 tons. And the machines can connected together to be put into use so as to improve the capacity.
3. Wide application: This type magnetic separator can be divided into 4 categories, more than 20 types and models, which can meet the needs of iron ore, river sand, tailings, slags, steel ash, sulfate slag, grinding materials, refractory, plating, rubber, food industries and etc. Some of them are with multi-purposes.
5. Working Principle of High Efficiency Wet Iron Powder Magnetic Separator
The pump enters into the mining area of the cell though ore box with the force of water flow. Magnetic particles form into magnetic ball or linkage with the force of magnetic field. The magnetic ball and linkage are absorbed on the drum during they are moving towards magnetic pole with the magnetic force. When the magnetic ball and linkage are rotating with the moving drum, because of alternating polarity and magnetic stirring, the gangue and other non magnetic ore mixed in magnetic ball and linkage is fall down, while magnetic ball and linkage are absorbed on the surface of the drum. These are concentrates we need. The concentrates come to the field where the magnetic is the weakest with the rotating drum. Then they fall in to concentrate slot by the water flow. But the full magnetic roller uses brush roll to discharge ores. At last, the non-magnetic or weak magnetic minerals are discharged out of the cell with plump.
6.Parameter of High Efficiency Wet Iron Powder Magnetic Separator
Specification |
Diameter
(mm) |
Length
(mm) |
Magnetic intensity
of cylinder surface
( Qa ) |
Separating
Particle
Size (mm) |
Capacity
(t/h) |
Motor power
(KW) |
Weight
(Kg) |
CTB-69 |
600 |
900 |
450 |
0-0.2 |
8-15 |
1.5 |
950 |
CTB-612 |
600 |
1200 |
450 |
0-0.2 |
15-25 |
1.5 |
1100 |
CTB-618 |
600 |
1800 |
450 |
0-0.2 |
15-30 |
2.2 |
1400 |
CTB-712 |
750 |
1200 |
550 |
0-0.2 |
12-30 |
3 |
1500 |
CTB-718 |
750 |
1800 |
500 |
0-0.15 |
20-45 |
3 |
2000 |
CTB-918 |
900 |
1200 |
550 |
0-0.2 |
45-80 |
4 |
2500 |
CTB-924 |
900 |
2400 |
500 |
0-0.15 |
60-100 |
4 |
2800 |
Zhengzhou HengXing Heavy Equipment Co.,Ltd
Zhengzhou Hengxing is a joint stock corporation integrating scientific research, manufacture, marketing and exporting with the main target at the large and medium sized series of heavy duty equipments for mining, ore selecting, wall materials, formed coal, metallurgy and ect. The company located at Zhengzhou National High-Tech Development Zone.
We are specialized in the research, development, and production of industrial crushing, powder grinding, mineral processing equipments and other related devices. These products include Stone Crushers, Jaw Crushers, Cone Crushers, Hammer Crushers, and Sand making Machines, Sand Washing machines, Rod Mills, Powder making Machines, Ore Dressing Machines, Briquette Machines and complete Cement Output Lines. Our products have been sold to areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future.