Two Chamber Mill Scale Ball Mill For Grinding Dry Powder
Ball Mill is the key equipment for grinding after the crush process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics, it also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials.
Ball Mill Working Principle:
The ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two /three chambers and grid. Material goes into the first chamber through the spiral feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended.
Ball Mill Structure:
The machine is composed of feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is with stable and reliable working condition. Moreover, according to different materials and discharging methods, there are dry ball mills and wet ball mills for choice.
Ball Mill Main Technical Parameters:
| Model |
shaft rotation speed(r/min) |
Ball load(t) |
Feeding size(mm) |
Discharging size(mm) |
Capacity(t/h) |
Power(KW) |
Weight(T) |
| Φ 900 × 1800 |
38 |
1.5 |
≤ 20 |
0.075 -0.89 |
0.65 -2 |
18.5 |
3.6 |
| Φ 900 × 2100 |
38 |
1.3-1.4 |
≤ 15 |
0.075 -0.83 |
0.7 -3.5 |
18.5 |
3.9 |
| Φ 900 × 3000 |
38 |
2.7 |
≤ 20 |
0.075 -0.89 |
1.1-3.5 |
22 |
4.5 |
| Φ 1200 × 2400 |
32 |
3.8 |
≤ 25 |
0.0745-0.6 |
1.5-4.8 |
30 |
11.5 |
| Φ 1200 × 2800 |
32 |
3.3-3.5 |
≤ 25 |
0.0745-0.6 |
2-6 |
30 |
13 |
| Φ 1200 × 4500 |
32 |
7 |
≤ 25 |
0.074 -0.4 |
1.6-5.8 |
45 |
13.8 |
| Φ 1500 × 3000 |
27 |
8 |
≤ 25 |
0.074 -0.4 |
2-5 |
75 |
17 |
| Φ 1500 × 3500 |
27 |
6.75
-6.4 |
≤ 25 |
0.075 -0.4 |
3-7 |
75 |
17.5 |
| Φ 1500 × 4500 |
27 |
14 |
≤ 25 |
0.074 -0.4 |
3.5-12 |
110 |
21 |
| Φ 1500 × 5700 |
27 |
15 |
≤ 25 |
0.074 -0.4 |
3.5-8 |
115 |
24.7 |
| Φ 1830 × 3000 |
24 |
18 |
≤ 25 |
0.074 -0.4 |
4-10 |
130 |
28 |
| Φ 1800 × 3600 |
24 |
10.6
-11.35 |
≤ 25 |
0.075 -0.4 |
5-22 |
130 |
33.5 |
| Φ 1830 × 7000 |
24 |
25 |
≤ 25 |
0.074 -0.4 |
7.5-17 |
210 |
36 |
| Φ 2100 × 3600 |
22 |
14-15.2 |
≤ 25 |
0.075 -0.4 |
15-36 |
370 |
46.8 |
| Φ 2200 × 5500 |
21 |
30 |
≤ 25 |
0.074 -0.4 |
10-20 |
210 |
48.5 |
| Φ 2200 × 6500 |
21 |
31 |
≤ 25 |
0.074 -0.4 |
14-26 |
380 |
52.8 |
| Φ 2200 × 7500 |
21 |
33 |
≤ 25 |
0.074 -0.4 |
16-29 |
380 |
56 |
| Φ 2400 × 3000 |
20.6 |
15.5
-16.6 |
≤ 25 |
0.075 -0.4 |
22-24 |
245 |
59 |
| Φ 2400 × 4500 |
21 |
30 |
≤ 25 |
0.074 -0.4 |
8.5-60 |
380 |
65 |
| Φ 2700 × 3600 |
20.6 |
39 |
≤ 25 |
0.074 -0.4 |
12-70 |
400 |
91.3 |
| Φ 2700 × 4000 |
20.7 |
40 |
≤ 25 |
0.074 -0.4 |
12-80 |
400 |
94 |
| Φ 2700 × 4500 |
20.7 |
48 |
≤ 25 |
0.074 -0.4 |
12-90 |
430 |
102 |
| Φ 3200 × 4500 |
18 |
65 |
≤ 25 |
0.075
-0.4 |
according to the technics |
800 |
137 |
Ball mill in factory :
Our service
Hengxing equipment can provide turkey service for customers, such as engineering consultation, engineering design, equipment manufacturing, packing & transportation, installation & commissioning personnel training etc.
About Spare Parts
Hengxing equipment will be dedicated to provide our customers with genuine spare parts with high quality. With our technological advice, the life cycle of your machine can be prolonged and sustained significantly with high effectiveness.
About Training
Hengxing equipemnt could offer excellent facilities and comfortable environment and training services to different customers. The training should include product training, safety training, operation training, maintenance know-how, technical know-how training, and regulations training, etc. All of the training is customized to fulfill every customer's expectations. Training programs can be conducted in our workshop, or at customer's site.
About Installation and Commissioning
Hengxing equipment are able to guide the overall installation of whole set production line, including crushing production line and cement equipment production line, etc., which will allow you to start the normal operation of equipment immediately. After installation,we will make inspection of the whole machine commissioning and operation condition and provide you testing data report of installation.
Why choose us?
1We have special Machinery Research Institute
2Our product quality has been in line with international level
3Our products are exported to ninety countries and regions
4We are dedicated to providing best solutions and turnkey projects
5A variety of honor to witness, 100% professional
6We provide you with all-round, one stop services
Audited Supplier 
){kind=link}