Small Gold Centriifugal Concentrator For Placer Gold
Gold centrifugal concentrator application
The gold centrifugal concentrator machine/gold recovery machine will separate any heavy material from any light material so long as there is sufficient difference in the densities of the individual particles in question. The Concentrator can treat particle sizes from below 10 microns up to a maximum of 6mm and is most commonly used for recovery in Gold and Platinum. Other recovery uses include Mercury, Palladium, Tantalum, Copper, Silver and Diamond Indicator Minerals.
High recovery gravity centrifugal gold concentrator, centrifuge separator is a kind of centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings.
Three models are available. Application shows that the recovery can be as high as 90%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0. 074mm, the recovery for the natural gold is expected up to 98%, For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.
Gold centrifugal centrifugal machine, separator machine operation process
Before starting the preparation and check:
1. According to the instructions of motor required for the preparation and check before use.
2. Check the equipment whether the anchor is stable.
3. Check the state of V-belt tension and adjust appropriately (factory test machine has made adjustments)
4. Check the equipment without interference of moving parts, manual turning checks.
5. Check the discharge port is closed.
Gold centrifugal concentrator structure:
Gold centrifugal concentrator technical parameters:
| Model |
STLB20 |
STLB30 |
STLB60 |
STLB80 |
STLB100 |
| Capacity(t/h) |
0-0.6 |
2-3 |
8-12 |
40-45 |
80-120 |
| Fluidization water Required(m³/h) |
2-3 |
3-5 |
7-10 |
30-36 |
60-80 |
| Slurry Water Required( m³/h) |
1.5-4 |
5-7 |
8-12 |
40-45 |
70-100 |
| Feeding Density(%) |
0-50 |
0-50 |
0-50 |
0-50 |
0-50 |
| Feeding Size(mm) |
0-3 |
0-3 |
0-5 |
0-5 |
0-6 |
| Concentrate Cleaning Up Cycle |
Vein gold 1-3 hours & placer gold 2-6 hours |
| Concentrate Weight(Kg) |
2 |
3-5 |
10-20 |
40-50 |
70-85 |
| Power(kw) |
0.75 |
1.5 |
4 |
11 |
18.5 |
| Weight(Kg) |
205 |
380 |
1100 |
2300 |
3200 |
| Dimensions L*W*H(mm) |
914x700x900 |
1160x885x1165 |
1820x1450x1700 |
2520x1900x2020 |
2600x2000x2400 |
Contact:
Sara Pang
Mobile phone : : 0086137 8347 1727
Audited Supplier 
){kind=link}