Ball mill for mineral processing: High grinding ratio, Hihg effciency, Save installation time and cost.
Ball mill is used to grinding many ores to very fine powder, so the mineral processing is easy to operate.
Ball mill consists of a cylindrical shell into which material is fed. The shell is supported on both ends with the help of bearings mounted on a stand. The shell rotates around a horizontal axis. The support below bearings is fabricated from heavy channel and plates & is machined to give perfect seating. Drive is either by gearbox or pulley.
Ball mills operate continuously, the material to be fine grinded is fed inside from one end and discharged at the other through pressure created by the help of an Air Blower.
We are also capable of suggesting on the different design aspects to deliver an energy efficient ball mill.
We also produce ball mill in cement industry, ball mill in ceramic industry. Dry ball mill and wet ball mill, etc.
Model |
Shell rotation speed(r/min) |
Ball load(t) |
Feeding size(mm) |
Discharging size(mm) |
Capacity |
Motor power(kw) |
Weight(t) |
(t/h) |
Ø 900*1800 |
36-38 |
1.5 |
< =20 |
0.075-0.89 |
0.65-2 |
18.5 |
4.6 |
Ø 900*3000 |
36 |
2.7 |
< =20 |
0.075-0.89 |
1.1-3.5 |
22 |
5.6 |
Ø 1200*2400 |
36 |
3 |
< =25 |
0.075-0.6 |
1.5-4.8 |
30 |
12 |
Ø 1200*3000 |
36 |
3.5 |
< =25 |
0.074-0.4 |
1.6-5 |
37 |
12.8 |
Ø 1200*4500 |
32.4 |
5 |
< =25 |
0.074-0.4 |
1.6-5.8 |
55 |
13.8 |
Ø 1500*3000 |
29.7 |
7.5 |
< =25 |
0.074-0.4 |
2-5 |
75 |
15.6 |
Ø 1500*4500 |
27 |
11 |
< =25 |
0.074-0.4 |
3-6 |
110 |
21 |
Ø 1500*5700 |
28 |
12 |
< =25 |
0.074-0.4 |
3.5-6 |
130 |
24.7 |
Ø 1830*3000 |
25.4 |
11 |
< =25 |
0.074-0.4 |
4-10 |
130 |
28 |
Ø 1830*4500 |
25.4 |
15 |
< =25 |
0.074-0.4 |
4.5-12 |
155 |
32 |
Ø 1830*6400 |
24.1 |
21 |
< =25 |
0.074-0.4 |
6.5-15 |
210 |
34 |
Ø 1830*7000 |
24.1 |
23 |
< =25 |
0.074-0.4 |
7.5-17 |
245 |
36 |
Ø 2100*3000 |
23.7 |
15 |
< =25 |
0.074-0.4 |
6.5-36 |
155 |
34 |
Ø 2100*4500 |
23.7 |
24 |
< =25 |
0.074-0.4 |
8-43 |
245 |
42 |
Ø 2100*7000 |
23.7 |
26 |
< =25 |
0.074-0.4 |
8-48 |
280 |
50 |
Ø 2200*4500 |
21.5 |
27 |
< =25 |
0.074-0.4 |
9-45 |
280 |
48.5 |
Ø 2200*6500 |
21.7 |
35 |
< =25 |
0.074-0.4 |
14-26 |
380 |
52.8 |
Ø 2200*7000 |
21.7 |
35 |
< =25 |
0.074-0.4 |
15-28 |
380 |
54 |
Ø 2200*7500 |
21.7 |
35 |
< =25 |
0.074-0.4 |
15-30 |
380 |
56 |
Ø 2400*3000 |
21 |
23 |
< =25 |
0.074-0.4 |
7-50 |
245 |
54 |
Ø 2400*4500 |
21 |
30 |
< =25 |
0.074-0.4 |
8.5-60 |
320 |
65 |
Ø 2700*4000 |
20.7 |
40 |
< =25 |
0.074-0.4 |
12-80 |
400 |
94 |
Ø 2700*4500 |
20.7 |
48 |
< =25 |
0.074-0.4 |
12-90 |
430 |
102 |
Ø 3200*4500 |
18 |
65 |
< =25 |
0.074-0.4 |
----- |
800 |
137 |