Rock Quarry Crusher for Mining From China Supplier
Quarry crusher :
Feeding Size: 50-1200mm
Processing Capacity: 1-1000t/h
Range of application: Jaw crushers are widely used in the compressive strength of 320 MPa below the various materials of coarse crushing, in the broken operation. The crusher has been widely used in mining, metallurgy, chemical, building materials, roads, railways, water and other industries.
Applied Material: Pebbles, Granite, Basalt, Iron Ore, Limestone, Quartzite, Diabase, Construction Waste, Gold Mine, etc.
1. quarry crusher Application
This quarry crusher - jaw crusher is mainly used in various industries, such as mining, smelting, road and railway construction, water conservation and chemical industry etc. PE Series is used in primary crushing, while PEX series is used in secondary crushing and fine crushing.
2.Quarry crusher working principle:
The motor drives the belts and the belt wheels, and make the movable jaw up and down by the eccentric shaft. When the movable jaw descends, the angle between the fixed jaw and the movable jaw becomes smaller, and the materials can be crushed; when the movable jaw rises, the angle between the fixed jaw and the movable jaw becomes bigger; and the movable jaw plate leaves from the fixed jaw by the function of the tension rod and the spring. And then the crushed materials are discharged from the lower outlet of the crushing cavity.
3. Quarry Jaw Crusher feature:
1). Simple structure and reliable operation
2). Easy maintenance and low operating cost
3). The frame of jaw crusher is very firm due to removing welding residual stress
3. Jaw crusher composition-structure
It is made up of frame, eccentric shaft, grooved wheel, flywheel, moving jaw, side guard plate, toggle Plate, toggle backseat, adjusting screw, returning spring, fixed jaw plate and moving jaw plate. Toggle plate is of safety function.
4. Special remarks: Please carefully examine the fasteners, especially lubrication components and bolts, before the machine is started. Enough oil must be needed on each lubrication component. Fasten the loose bolts, clear the crushing cavity, and then start the machine. During the normal operation, even material feeding is important. Insufficient load or over load is not allowed. Moving jaw plate, fixed jaw plate, side guard plate and roof plate are wearing parts, and much attention should be paid to them.
4.Quarry Jaw crusher specification:
| Model |
Feed opening size(mm) |
Maximum feed size |
Discharge Gatesize(mm) |
Capacity(t/h) |
Motor Power(kw) |
Overall dimensionL×W×H(mm) |
| PE150×250 |
150×250 |
130 |
15-45 |
1-4 |
5.5 |
896×745×935 |
| PE250×300 |
250×300 |
150 |
15-55 |
3-6 |
7.5 |
1050×987×1000 |
| PE250×400 |
250×400 |
210 |
25-60 |
5-20 |
15 |
1215×1520×1030 |
| PE400×600 |
400×600 |
350 |
40-90 |
15-60 |
30 |
1650×1588×1050 |
| PE500×750 |
500×750 |
425 |
50-100 |
40-110 |
45 |
1956×1918×1920 |
| PE600×900 |
600×900 |
500 |
60-125 |
90-180 |
55 |
2250×2733×2280 |
| PE800×900 |
800×900 |
600 |
80-140 |
100-220 |
75 |
2450×2950×2490 |
| PE750×1060 |
750×1060 |
630 |
60-150 |
110-380 |
110 |
2531×2455×2783 |
| PE900×1060 |
900×1060 |
700 |
100-160 |
230-390 |
110 |
2900×2657×2950 |
| PE900×1200 |
900×1200 |
750 |
110-165 |
220-450 |
110-132 |
3100×2760×3260 |
| PE1200×1500 |
1200×1500 |
950 |
115-195 |
400-800 |
180-220 |
3710×3446×4075 |
| PE1500×1800 |
1500×1800 |
1200 |
135-225 |
500-1000 |
280 |
5100×4700×4300 |
| PEX150×750 |
150×750 |
120 |
10-40 |
5-16 |
15 |
1310×1118×1145 |
| PEX250×750 |
250×750 |
210 |
15-50 |
15-30 |
22-30 |
1400×1751×1515 |
| PEX350×750 |
350×750 |
300 |
15-50 |
18-40 |
30 |
1485×1680×1648 |
| PEX250×1000 |
250×1000 |
210 |
15-60 |
15-60 |
30 |
1550×1964×1380 |
| PEX250×1200 |
250×1200 |
210 |
15-60 |
20-60 |
37-45 |
1530×1946×1380 |
| PEX300×1300 |
300×1300 |
250 |
25-60 |
16-105 |
55-75 |
2000×2320×1730 |
Our service
Hengxing equipment can provide turkey service for customers, such as engineering consultation, engineering design, equipment manufacturing, packing & transportation, installation & commissioning personnel training etc.
About Spare Parts
Hengxing equipment will be dedicated to provide our customers with genuine spare parts with high quality. With our technological advice, the life cycle of your machine can be prolonged and sustained significantly with high effectiveness.
About Training
Hengxing equipemnt could offer excellent facilities and comfortable environment and training services to different customers. The training should include product training, safety training, operation training, maintenance know-how, technical know-how training, and regulations training, etc. All of the training is customized to fulfill every customer's expectations. Training programs can be conducted in our workshop, or at customer's site.
About Installation and Commissioning
Hengxing equipment are able to guide the overall installation of whole set production line, including crushing production line and cement equipment production line, etc., which will allow you to start the normal operation of equipment immediately. After installation,we will make inspection of the whole machine commissioning and operation condition and provide you testing data report of installation.
What we offer?
We are developing heavy industrial machines and allowing mining companies to implement efficient and more effective ways of mining through our goods. We have variety of products available for sale. These products include Stone Crushers, Jaw Crushers, Cone Crushers, Hammer Crushers, and Sand making Machines, Sand Washing machines, Rod Mills, ball mill,, Ore Dressing Machines,rotary dryer,rotary kiln,coal briquette machine . Development of these machines had never been an easy task. Sand making equipments are offered by Hengxing Equipment with very nominal prices. The research facility of our industry enables our engineers to serve international market with new theories and develop a perfect solution for the mining world. Our Products have a great demand in all over the world.
Audited Supplier 
){kind=link}
){kind=link}